TESTAF represents the first ever standard to define pilot's watches in professional use.
Research project initiated by Sinn Spezialuhren
The Faculty of Aerospace Technology at the Aachen University of Applied Sciences (FH), headed by Prof. Dr.-Ing. Frank Janser, and Sinn Spezialuhren joined forces to develop a technical standard for pilot's watches (TESTAF) in a research project lasting several years. To obtain TESTAF-certification, a pilot's watch must satisfy all time measurement requirements for civil flights operating under visual and instrument flight rules. The EZM 10 and the 103 Ti Ar were the first SINN watches to undergo and pass the strict test procedures.
![](https://www.sinn.de/out/pictures/ddmedia/gravity/Prof_Dr_Ing_Janser_und_Dipl_Ing_Schmidt-min.jpg?width=640&height=360&quality=100)
The project was proposed by Lothar Schmidt (Dipl.-Ing.), the proprietor of Sinn Spezialuhren, back in 2008. At that time there was no equivalent DIN standard for pilot's watches to that for diver's watches. The partnership saw Sinn Spezialuhren continue its tradition of close collaboration with renowned technological institutions. Its diver's watches, for instance, are tested and certified to European diving equipment standards by DNV – a unique procedure in the industry.
The TESTAF scientific committee (right to left): Dr. Wolfgang Schonefeld (Sinn Spezialuhren), Dr. Martin Hoch (scientific coordinator), Prof. Dr.-Ing. Frank Janser (Aachen University of Applied Sciences), Martina Richter (Uhren-Magazin), Volker Bau (Dipl.-Ing., Airbus Helicopters), Jürgen Hensiek (Aachen Institute of Applied Sciences e.V.).
TESTAF - a completely new departure
What are the distinguishing features of a professional pilot's watch? Which aviation requirements does it need to fulfil? Which features are indispensable? To provide universally valid answers to these questions it was necessary to formulate a norm or standard. Such a standard did not, however, exist for pilot's watches at that time. And so in 2008 Lothar Schmidt (Dipl.-Ing.), managing director and owner of Sinn Spezialuhren, seized the initiative and decided to close this research gap together with Prof. Dr.-Ing Frank Janser of the Aachen University of Applied Sciences, for years now one of the most respected centres for aerospace technology (the mechanical engineering faculty, to which the aerospace technology department belongs, topped the 2012 university rankings).
With its long tradition of developing and testing aerospace instrumentation, the Aachen University of Applied Sciences uniquely combines a strong practical orientation with profound scientific knowledge and flight engineering expertise. The faculty is one of the few in Germany to own its own aircraft; it uses these for teaching, flight laboratory and research purposes. The Aachen University of Applied Sciences is one of the leading teaching and research institutions in Europe in the field of aviation.
Technical progress in watches
The collaboration with the Aachen-based aerospace engineers permitted a number of technical advances in watchmaking to be applied for the first time. Under TESTAF, for example, the low pressure resistance of the watches must be tested more than once. Indeed, they are subjected to several thousand pressure change cycles in order to simulate the actual stress conditions on the wrist of a pilot. Besides being water resistant, a pilot's watch must also be resistant to common aviation fluids such as fuels, hydraulic fluids and cleaning and de-icing agents. In addition, the magnetic field of the pilot's watch itself must not interfere with the avionics such as the aircraft's emergency compass. A further safety aspect is that a pilot's watch must not dazzle the pilot and must be largely free of reflections.
Specifications
The aim of the project was to draw up a clear catalogue of technical and functional specifications which precisely describe the time measurement requirements during flight in the following categories:
1. Functionality
- Required functions during flights operating under visual and instrument flight rules
- Readability in daylight and in darkness
- Good operability
- Accuracy and power reserve
2. Resistance to external stress
- Absolute and cyclical ambient pressure changes
- Operative temperature range and rapid temperature change
- Shock and impact resistance, G-forces and vibration
- Resistance to water and other aviation fluids
- Effects of magnetic fields on the watch
3. Safety and compatibility with other instruments
- Effects of the watch's magnetic signature on avionics
- Avoidance of reflections and dazzle
- Appropriate form
- Secure strap fastening
Quality seal of TESTAF-certified watches
Based on these requirements the Aachen University of Applied Sciences developed an exacting testing regime which can be used by all watch manufacturers. Pilot's watches which pass the TESTAF conformity tests are awarded a certificate. Only TESTAF-certified watches are permitted to feature the protected quality seal – a stylised silhouette of an aircraft framed in the cockpit display of the attitude indicator. The theoretical findings were confirmed by subjecting them to practical and detailed tests by Airbus Helicopters. These were carried out by chief test pilot Volker Bau (Dipl.-Ing.) over several weeks during the testing of a helicopter prototype. A technical committee, of which Sinn Spezialuhren is also a member, was set up to oversee the further development of TESTAF. TESTAF also provides specialist editorial staff with a reliable set of scientifically and practically proven evaluation criteria.
![](https://www.sinn.de/out/pictures/ddmedia/gravity/TESTAF-Vortrag_Janser.jpg?width=640&height=360&quality=100)
Positive public response
On 19 July 2012 Sinn Spezialuhren, the Aachen University of Applied Sciences and Airbus Helicopters presented the first version of TESTAF at the German headquarters of Airbus Helicopters in Donauwörth. The research results were welcomed by the representatives of various watch manufacturers, the aviation industry and the specialist press.