- Case and crown made of high-strength, seawater-resistant German Submarine Steel
- Bezel with Black Hard Coating on a TEGIMENT Technology basis
- Diameter of case: 44 mm
- Tested based on European diving equipment standards and certified by an independent institute
- Captive diver's bezel with minute ratcheting
- Crown at 4 o'clock to prevent pressure on the back of the hand
- Sapphire crystal glass
- Water-resistant and pressure-resistant to 1,000 m diving depth (= 100 bar), certified by an independent institute
- Low pressure resistant
U1 SDR
2.340,00 €
*
With the diving watch U1, Sinn engineers succeeded in developing a diving watch in which the quality of material and design gives it superior resistance to external influences under extreme conditions of use.
In their search for a steel with the desired resistance, the Sinn engineers found what they were looking for at the German submarine manufacturer ThyssenKrupp Marine Systems: the steel manufacturers supply small quantities of the original steel of the current German submarine production exclusively to Sinn for making diving watches — the very steel of which the external hulls of the German Navy's new submarine class 212, which currently represents the most advanced non-nuclear submarines in the world, are made. This original submarine steel is not only extraordinarily seawater-resistant but is also of the highest non-magnetic quality without any residual magnetism.
To ensure reliably that the rotating bezel of the diving watch does not detach under harsh impacts, it is attached as a captive bezel to the central part of the case.
The water-resistance and pressure resistance of 100 bar (= 1000 m water depth) was certified for the diving watch U1 by DNV. The safety test pressure used for this purpose was 125 bar.
.webp)
Special characteristics
Technical details
Movement
SW 200-1
Self-winding mechanism
26 bearing jewels
28,800 semi-oscillations per hour
Seconds stop function
Anti-magnetic as per DIN 8309
Self-winding mechanism
26 bearing jewels
28,800 semi-oscillations per hour
Seconds stop function
Anti-magnetic as per DIN 8309
The information on the mechanical movement corresponds to the current production situation in Frankfurt am Main. Due to technical changes, it may happen in individual cases that stock items of our sales partners deviate from this information.
Case
Case made of German Submarine Steel, bead-blasted
Sapphire crystal glass in front, anti-reflective on both sides
Case back screw-fastened
Crown screwable
Meet the technical requirements for water-resistance, as set out in standard DIN 8310
Water-resistant and pressure-resistant to 1,000 m diving depth (= 100 bar), certified by an independent institute
According to the technical demands for the diving norm DIN 8306
Tested based on European diving equipment standards EN 250 / EN14143 and certified by an independent institute
Low pressure resistant
Sapphire crystal glass in front, anti-reflective on both sides
Case back screw-fastened
Crown screwable
Meet the technical requirements for water-resistance, as set out in standard DIN 8310
Water-resistant and pressure-resistant to 1,000 m diving depth (= 100 bar), certified by an independent institute
According to the technical demands for the diving norm DIN 8306
Tested based on European diving equipment standards EN 250 / EN14143 and certified by an independent institute
Low pressure resistant
Functions
Hours, minutes, seconds
Date display
Diver’s bezel with minute ratcheting and luminous key mark
Date display
Diver’s bezel with minute ratcheting and luminous key mark
SINN Technologies
Bezel with Black Hard Coating on a TEGIMENT Technology basis
Captive bezel
Captive bezel
Dimensions and Weight
Case diameter: 44 mm
Band lug width: 22 mm
Case thickness: 14.7 mm
Weight without strap: 113 gramme
Band lug width: 22 mm
Case thickness: 14.7 mm
Weight without strap: 113 gramme
Dial and Hands
Matte black dial
Indices coated with luminescent colour
Hour, minute and second hand coated with luminescent colour
Indices coated with luminescent colour
Hour, minute and second hand coated with luminescent colour
